203 ACCELERATOR & FROSTPROOFER
203 ACCELERATOR & FROSTPROOFER
August 9, 2017
406 STABILISING SOLUTION
406 STABILISING SOLUTION
August 9, 2017
Show all
204 EVERMIX 3 IN 1
Eye Protection must be worn
Safety Boots must be worn
Face Protection must be worn
Safety Gloves must be worn
Safety Overall must be worn

204 EVERMIX 3 IN 1

Price Per item: £5.99 excl. VAT


EVERMIX 3 IN 1 is a triple action air en-training chloride free liquid/gel admixture for waterproofing, plasticizing and retarding the setting time of render mixes, such as roughcast, harling and dashing. The product also acts as a salt inhibitor. May also be used internally after installation of a DPC system.

204 EVERMIX 3 IN 1

                                                                                                          Product Description

EVERMIX 3 IN 1 is a triple action air en-training chloride free liquid/gel admixture for waterproofing, plasticizing and retarding the setting time of render mixes, such as roughcast, harling and dashing. The product also acts as a salt inhibitor. May also be used internally after installation of a DPC system. Tested to EN 934-3.

Benefits
• The combination of an air en-trainer and retarder allows larger areas to be covered in one application
• Improves work-ability/trowel-ability.
• Significantly reduces water penetration.
• Chloride free (chloride ion content < 0.1%).
• Reduces bleeding/segregation.
• Improves durability.
• Inhibits efflorescence.
• Reduces shrinkage (cracking and crazing reduced).
• Enhances insulation properties.

Areas For Use
As an admixture for exterior/interior cementicious render finishes such as roughcast, harling and dashing. May also be used internally after installation of a DPC system.

Limitations
• When mixing, take care not to over mix.
• Does not replace a DPC

Surface Preparation
Before using 3 IN 1 IN RENDER MIX, it is important to ensure that the surface to which it is to be applied is clean and free form dust and loose material and that the structure has sufficient mechanical strength. Walls should be wire-brushed and any old paint etc. removed. All contaminants such as oil, grease, or any surface contamination must be removed to ensure adequate development of bond when the render is applied.

Application
Work should be carried out in accordance with the methods outlined in the Code of Practice BS5262 (1991) Code of Practice for External Renders should be consulted for selection of materials and correct mix design for substrate. In all cases, add to mix at an addition rate of 250 to 500ml per 50kg cement depending on the degree of plasticizing/retardation required. Note: remember to reduce required quantity of water accordingly (up to 20%). Alternatively, add to mixing drum at an addition rate of one part 3 IN 1 to 20/40 parts water.

Health & Safety
Consult MSDS for full list of hazards.

Storage
Store at moderate temperatures. PROTECT FORM FROST.

Shelf Life
2 years when stored according to manufacturers instructions.

The company reserves the right to take a deposit for the hire of goods at inception