204 EVERMIX 3 IN 1
204 EVERMIX 3 IN 1
August 9, 2017
503 SBR BOND
503 SBR BOND
August 10, 2017
Show all
406 STABILISING SOLUTION
Eye Protection must be worn
Safety Boots must be worn
Face Protection must be worn
Safety Overall must be worn
Safety Gloves must be worn

406 STABILISING SOLUTION

Price Per item: £9.39 excl. VAT


EVERBUILD STABILISING SOLUTION is a specially formulated microscopically fine polymer emulsion which penetrates deeply into dusty/chalky and badly weathered surfaces to leave a stable sound base for subsequent decoration with paint/wallpaper/tiling etc. Suitable for both interior and exterior use over plaster, rendering, pebble dash,, stucco, existing painted surfaces, brickwork, block work etc.

406 STABILISING SOLUTION

                                                                                                          Product Description

EVERBUILD STABILISING SOLUTION is a specially formulated microscopically fine polymer emulsion which penetrates deeply into dusty/chalky and badly weathered surfaces to leave a stable sound base for subsequent decoration with paint/wallpaper/tiling etc. Suitable for both interior and exterior use over plaster, rendering, pebble dash,, stucco, existing painted surfaces, brickwork, block work etc.

furthermore

Benefits
• Most of all Stabilizes and binds interior and exterior friable surfaces prior to over-coating.

Areas For Use
As an effective stabilizer for Brick, Stone, Render, Concrete, Plaster, Pebble dashing/stucco etc prior to applying a further surface coating.

Limitations
• Ready to use product. Do not dilute.
• Dispose of this product and packaging correctly. consequently Do not allow to enter watercourses.
• Will not restore badly disintegrated render/plaster etc hence therefore this will require removing and subsequent re-application.
• It is the user’s responsibility to determine suitability for use so if in doubt, please contact Technical Services Department for further advice.
• Do not apply below 5°C.
• Do not apply externally while rain is imminent (within 6 hours)

Surface Preparation
First of all surfaces must be clean, dry (to touch) and always free grease and other contaminants. Finally remove all loose and flaking material with a scraper and a stiff brush back to a sound surface. although you can cure all root causes of penetrating damp and remove all moss/mould contamination with EVERBUILD MOSS AND MOULD REMOVER according to the instructions on the container.

Application
This is a ready to use product. SO DO NOT DILUTE. Making sure to apply by brush in one liberal coat evenly. For extremely porous surfaces, apply a second coat when dry. in addition drying time 2-4 hours depending on temperature, humidity etc.

COVERAGE; 5-10m2 per litre depending on porosity of surface and method of application.

STORAGE: Store in cool dry conditions away from direct sunlight between 5 and 30oC . PROTECT FROM FROST.

Health & Safety
Consult MSDS for full list of hazards.

Storage
Store in cool, dry conditions, between 5 and 25°C. PROTECT FROM FROST

Shelf Life
12 months

The company reserves the right to take a deposit for the hire of goods at inception