EUROSCRIM TAPE
EURO-SCRIM TAPE
August 14, 2017
Black Roundstyle Gutter 112mm 4M Length
Black Roundstyle Gutter 112mm 2M Length
August 30, 2017
Show all
FIX & FILL EXPANDING FOAM
Eye Protection must be worn
Safety Boots must be worn
Ear Protection must be worn
Safety Gloves must be worn
Safety Overall must be worn
Face Protection must be worn

FIX & FILL EXPANDING FOAM

Price Per item: £4.99 excl. VAT


EVERBUILD FIX & FILL are quick setting one part polyurethane foams in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application to up to 150% its original volume .
Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +30oC, ideally 20oC.

FIX & FILL EXPANDING FOAM

Product Description

EVERBUILD FIX & FILL are quick setting one part polyurethane foams in aerosol form. FIX & FILL is supplied with attachable nozzles. The foam expands on application to up to 150% its original volume .
Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5 to +30oC, ideally 20oC.

Benefits
 Quick setting – can be cut, sawn or plastered in 1 hour.
 Economical in use – expands up to 55 times its original volume.
 Fills irregular and broad gaps where most conventional fillers would fail.
 Possesses insulating and sound deadening properties.

Areas for Use

Filling
 Gaps around pipe entries through walls.
 Gaps around window frames, door frames.
 electrical wire chasing prior to plastering
 deep joints prior to applying sealant or plaster
 irregular gaps in stone, brick, concrete or plaster

Fixing
 door frames
 timber structures
 Window sills and thresholds.
 Window frames

Insulating
 Behind cladding to exterior walls.
 behind soffit and barge boards

Limitations
 Carefully read instructions and text in warning box before use.
 Do not over pressurize container.
 Always apply above 5oC ideally 20°C (conditions and product)
 Clean spills immediately with EVERFLEX FOAM CLEANER.

 When using FILL AND FIX FOAM, always remove nozzle from can and clean immediately after use with EVERFLEX FOAM CLEANER
 For fire rated joints, use EVERFLEX FIREFOAM B1 in conjunction with EVERFLEX FIREMATE
 Once cured, dry foam must be removed mechanically or use FOAM EATER (always cut back and use on residues). No solvent will remove the product

Surface Preparation
Ensure all surfaces are clean, sound and also free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

Application
ALWAYS WEAR PROTECTIVE GLOVES.
Shake can well before use (about 20 times).
For the FILL AND FIX PRODUCT, carefully fix nozzle also Do not over tighten or force.
ALWAYS USE CAN UPSIDE DOWN.
Only partially fill cavities hence the foam will expand to fill the remaining space. Any excess foam can be removed whilst still wet with EVERFLEX FOAM CLEANER. Cured foam must be removed mechanically or also use FOAM EATER. When used for fixing door frames, supports must be used until the foam is fully cured.

Please note:
When transported in cars, keep upright and secured in boot, out of direct sunlight.
When removing cured foam from skin, take care not to damage with abrasives.
Grease skin with body lotion or similar.

IMPORTANT – Re-use is only possible by cleaning the nozzle and valve tip with EVERBUILD DUAL PURPOSE FOAM CLEANER before the foam has cured also Do not push any object into the valve as the contents may explode.

Health & Safety
Consult MSDS for full list of hazards

Storage
Store upright between 20 and 25oC Pressurized container. Protect from sunlight and also do not expose to temperatures above 50oC. Do not pierce or burn the can even after use also Store as flammable liquid.
Note also: Elevated temperatures will reduce shelf life dramatically.

Shelf Life
12 months in original containers at stated storage temperatures.

The company reserves the right to take a deposit for the hire of goods at inception